Description

The Holybro Kakute F4 V2.4 Flight Controller includes a plug-and-play DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash, 5V and 9V 3A BEC, easy soldering layout and much more.

The Kakute F4 V2.4 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, and I2C pads (SDA & SCL) for external GPS Magnetometers.

Features:

New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Supports DShot 150 300 600 1200 & MultiShot OneShot Proshot PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120 (V1.9 Version)

Package Include:

1× Kakute F4 V2 STACK (FC+ESC)
1× Electrolytic capacitor: 1000uF 35v
1× 8pin to 8pin 1mm pitch 65mm cable
1× 8pin to 8pin 1mm pitch 25mm cable
1× JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI Caddx HD System)
1× JST SH 6pin 100mm cable(for Caddx HD Systems)

Specification:-

Item Type:		Other Accessories
Continuous Current (A):		50A x 4
Burst Current (A)		60A x 4
Supports Battery		4-6S
Dimensions (L x W x H) mm		48x37x6
Weight (g):		13.8
Mounting holes		M4 30.5×30.5mm (M3 grommets included)
Shipping Weight		0.070 kg
Shipping Dimensions		10 × 8 × 4 cm

Title	Default Title