-70%

SpeedyBee F7 V3 Flight Controller. Discount

Original price was: $6,499.00.Current price is: $1,949.70.
0 reviews
30 people are viewing this right now
Estimated Delivery:
14 - 21 Mar, 2025
Trust Badge
Guaranteed safe & secure checkout

Description

The “F7” in the name indicates that the flight controller is equipped with an F7 processor. F7 processors are 32-bit and provide more processing power compared to earlier generations like F4, allowing for advanced features and better performance.

Integrated Gyroscope and Accelerometer:

Flight controllers typically include a gyroscope and accelerometer for stabilization and orientation sensing. These sensors help the flight controller maintain a stable flight.

Barometer (optional):

Some flight controllers may include a barometer, which provides altitude information. This can be useful for features like altitude hold or in combination with GPS for navigation.

Connectivity:

UART ports for connecting peripherals such as GPS modules, receivers, and other accessories.

USB port for firmware updates and configuration.

On-Screen Display (OSD):

Integrated OSD allows you to overlay flight data on your FPV video feed, including battery voltage, flight time, and other important information.

Current Sensor:

A current sensor measures the current drawn from the battery, providing real-time information about power consumption.

Voltage Regulator (BEC):

Some flight controllers come with a built-in voltage regulator (BEC) to provide a stable 5V output for powering other components on the drone, such as cameras and video transmitters.

Blackbox Logging:

Blackbox logging allows you to record flight data for later analysis. This feature is valuable for troubleshooting and tuning your drone.

Compatibility:

The physical size and mounting hole pattern should be compatible with your drone frame. Common mounting hole patterns include 30.5×30.5mm and 20x20mm.

DShot Protocol Support: 

DShot is a digital communication protocol between the flight and electronic speed controllers (ESCs). Look for support for the latest DShot protocols for efficient and precise motor control.

3 BL32 50A 30×30 Stack

NOW THIS IS A REAL
FLAGSHIP STACK

SpeedyBee

SpeedyBee F7 V3

PREMIUM SPEC.
AFFORDABLE PRICE

SpeedyBee

Flash your firmware 33% faster
wirelessly + full FC configuration

Built with a better Bluetooth WiFi 2-in-1 chip for 33% faster wireless data
transfer. Update FC firmware with your smartphone in just 1 minute!
Connect this FC via Bluetooth and fully configure any settings for
Betaflight INAV as you want.

SpeedyBee

Get your Blackbox data in
1 minute anytime, anywhere

With an optimized algorithm and upgraded Bluetooth WiFi chip, you can
dive into your Blackbox data every time you land your quad. Take
your smartphone out, connect, and download your flight in 20 seconds.
The path to progress has never been easier.

SpeedyBee

Hate soldering?
Just plug them all in!

It’s 2022, so having a plug vs soldering option is a must! Plug in your
digital video transmitter, receiver, camera, VTX, and GPS to complete
your build quickly. Also comes with 4x LED plugs so you can light
up your quad with no headache. Prefer soldering? Just flip the board
and start working on it.

SpeedyBee

Change your motor
direction wirelessly

Finishing your latest build Just replaced your
motor after a crash? Take your smartphone out,
and configure your motor direction wirelessly
with the latest SpeedyBee app. Works for all
BLHeli32 BLHeli_S BlueJay ESCs.

SpeedyBee

8 motors output, perfect for
your X8 cinelifters!

There’s no other X8 flight controller better than this. Forget about
crawling through your massive build just to plug in that USB cable.
Just take out your phone to configure that X8 monster wirelessly
before that challenging commercial shot. Professional FPV pilots
got no time to waste.

SpeedyBee

Light up your quad in no time
with 4x LED plugs

Need more visibility at night? Just plug in your LEDs and blaze the
darkest trail you can find, no soldering required. With just one tap
on the Boot button, you can cycle through all different LED presets*
and pick the one you love!

*Or long press the boot button to switch to Betaflight LED mode

SpeedyBee

Forgot your LiPo checker?
Just look at the FC!

Built with a 4-level LED battery indicator, now you can fly anywhere
worry-free – even without your lipo checker!

SpeedyBee

32MB (typical FC memory) X 16
=500MB onboard Blackbox
flash memory

Store up to 100 complete flights with our huge 500MB onboard
Blackbox flash memory. Or keep your encrypted Area 51 files in
it for your top-secret Man in Black mission. Whatever suits your
tactical purpose.

*The Flash memory chip manufacture calculates the capacity by a
rate of 1000(instead of 1024), so the display capacity on your
computer will be slightly less than 500MB.

SpeedyBee

And packed with other useful
features

● 9V 4A + 5V 2A individual BECs
● Power your GPS with a USB cable – no battery needed
● 22mm cutouts for FPV camera in your tight build
● Built-in barometer for accurate height calculation

SpeedyBee

SpeedyBee BL32 50A 4-in-1 ESC

50A ESC MADE FOR CHAMPIONS

SpeedyBee

When we say 50A, we mean it.

Real 50A output, ready for your baddest, meanest 6S motors.
Blast through any obstacle during freestyle with no worry, or
keep that highest throttle position during races.

SpeedyBee

1000uF Low ESR capacitor + TVS
protective diode = Extra protection

The ESC is built with TVS protective diode to absorb the voltage spike
when you plug in the battery, or during crashes that block your props.
We also provide a humongous 1000uF low ESR capacitor, ensuring
clean data from the gyro to the FC.
Tested by 2 top racing pilots with both over 1500 packs, or you can
put it to the test yourself.

SpeedyBee

Wanna crank it up to 128KHz PWM?
Why not?

With F4 MCU, you can set the PWM frequency up to 128KHz. Find
the best PWM frequency* to get for your build without any limitation.

* The ideal PWM frequency for each build varies depending on the
frame, motors, props, and other factors. Higher PWM frequency
doesn’t necessarily means smoother flight. If the default 48KHz is
not working for your build, you can increase the value gradually
until you find the sweet spot. Check your motor temperature to
avoid overheating.

SpeedyBee

CNC heat sink shield =
no overheating in any condition

Built with high-quality CNC heat sink to significantly reduce the
heat from your MOSFETs ensuring stable current flow at a high
throttle position. Great benefit in a stylish blue finish.

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

SpeedyBee

Specification:-

Product Name

SpeedyBee F7 V3 Flight Controller

MCU

STM32F722

IMU(Gyro)

BMI270

USB Port Type

Type-C

Barometer

BMP280

OSD Chip

AT7456E chip

BLE Bluetooth

Supported. Used for Flight Controller configuration,built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip

Flash FC Firmware Wirelessly

Supported. Please enter MENU > FC Firmware Flasher

Download Analyze Blackbox

Supported.Please enter MENU > Blackbox Analyzer

DJI Air Unit Connection Way

Two ways supported: 6-pin connector or direct soldering.

6-pin DJI Air Unit Plug

Supported. Completely compatible with DJI O3 RunCam Link Caddx Vista DJI Air Unit V1, no wire is needed to be changed.

Flash(for BlackBox)

500MB

BetaFlight Camera Control Pad

Yes(CC pad on the front side)

Power Input

3S – 6S Lipo

5V Output

10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A.

9V Output

2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A.

3.3V Output

Supported. Designed for 3.3V-input receivers. Up to 500mA current load.

4.5V Output

Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.

ESC Signal Pads

M1 – M4 on bottom side and M5-M8 on front side.

UART

5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)

ESC Telemetry UART

R4(UART4)

I2C

Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc.

LED Pad

Used for WS2812 LED controlled by Betaflight firmware.

Buzzer

BZ+ and BZ- pad used for 5V Buzzer

BOOT Button

Supported.
[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked.
[B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.

RSSI Input

Supported. Named as RS on the front side.

SmartPort

Supported

Supported Flight Controller Firmware

BetaFlight(Default),INAV

Firmware Target Name

SPEEDYBEEF7V3

Mounting

30.5 x 30.5mm( 4mm hole diameter)

Dimension

41(L) x 38(W) x 8.1(H)mm

Weight

10.7g

Title

Default Title

Related products

kickassus.shop © 2025 All Rights Reserved

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare